4559-0001-45_4559-0002-45_4559-0003-45_4559-0004-45_hvid-scaled

Angle profile – Model 4559

The 20×40 mm angle profile from PRIMO is a sturdy and versatile trim used to protect both outward- and inward-facing corners. It is ideal for areas where extra strength and durability are needed—for example, in hallways, at interior door corners, or in high-traffic areas. The angle profile provides a clean and sharp finish at the corner, while also covering uneven surfaces and protecting against impacts, blows, and wear.

Like PRIMO’s other plastic moldings, this model is easy to work with, weighs very little, and does not split during installation. This makes it ideal for both new construction and renovation projects, and suitable for both residential and commercial use.

The angle profile is available in white and can easily be painted if you wish to match it to a wall or interior decor.
A simple solution that both reinforces and enhances the appearance of your construction project.

Do not crack

Easy to mount

Flexibel

Shape as you like

No need to paint

Minimal maintenance

4559, 1.0 m – angle profile, white

Variant: 4559-0001-45

DB: 1936044

EAN: 4260027236561

Colli: 20 Pcs

4559, 1.5 m – angle profile, white

Variant: 4559-0002-45

DB: 1936045

EAN: 4260027236578

Colli: 20 Pcs

4559, 2.2 m – angle profile, white

Variant: 4559-0003-45

DB: 1936047

EAN: 4260027236585

Colli: 20 Pcs

4559, 2.2 m – self-adhesive angle profile, white

Variant: 4559-0004-45

DB: 2059066

EAN: 5709847455947

Colli: 20 Pcs

Additional information

Bredde	40 mm
Colli	20 Pcs
Produkttype	Angle list, Trim mouldings
Toldnummer	39162000

The angle profile is easy to install and can be attached in several ways, depending on the surface and the project’s requirements. You can use nails, staples, or choose an adhesive-based solution such as construction adhesive or an alcohol-based silicone. The trim is flexible and easy to cut to size, and it adapts well even to minor unevenness in the wall. This provides a neat and durable result—whether you’re an experienced professional or a do-it-yourselfer.

Here is how:

Thoroughly clean the surface of dust and grease.
Measure and cut the angle profile to the desired length.
Secure the trim with nails, staples, or construction adhesive—spaced approximately 30–50 cm apart.
Press the entire trim firmly into place so it makes good contact with the corner.

Here is how to do it—Self-adhesive:

Thoroughly clean the surface of dust and grease so that the adhesive bonds properly.
Measure and cut the angle profile to the desired length.
Peel off the protective film from the self-adhesive backing.
Carefully position the molding along the corner and press it firmly all the way along—especially at the ends and edges.