5103-0001-45_5103-0002-45_5103-0005-45_hvid-scaled

Wall List – Model 5103

Wall moldings from PRIMO let you combine a simple design with great functionality. They’re often used to create smooth transitions between walls, doors, and windows, but are also ideal for creative solutions like wall panels.

The material is flexible and adapts to the surface—even if the wall isn’t completely smooth. If you need to bend the trim, you can easily do so by heating it with a heat gun.

The result is a durable and visually elegant solution that complements both modern and classic interiors.

You can choose between versions with or without adhesive, depending on how you want to install the trim.

Do not crack

Easy to mount

Flexibel

Shape as you like

No need to paint

Minimal maintenance

5103, 0.9 m – white wall molding

Variant: 5103-0002-45

Colli: 20 Pcs

5103, 2.5 m – self-adhesive wall trim, white

Variant: 5103-0005-45

Colli: 20 Pcs

5103, 2.5 m – white wall trim

Variant: 5103-0001-45

Colli: 20 Pcs

Additional information

Højde
Bredde	5 mm
Længde
Colli	20 Pcs
Produkttype
Toldnummer	39162000

The wall panel can be installed in several ways—using nails, screws, or mounting adhesive.

For best results, we always recommend degreasing the surface where the trim will be installed. Then, choose the method that works best for you.

When installing with nails or screws, we recommend securing the trim at 30–50 cm intervals, depending on the mounting surface.

It’s that easy:

Use a fine-toothed saw and cut the trim to the desired length.
Clean the wall of dirt and debris for maximum durability
Choose your installation method—nails/screws or mounting adhesive
Place the trim on the wall in the desired position.
Secure the trim at intervals of approximately 30–50 cm, depending on the wall’s texture. Or apply mounting adhesive to the trim and then press it firmly against the wall.

The trim is also available in a self-adhesive version, which requires no special tools for installation.

It’s that easy—self-adhesive:

Degrease/clean the surface for the best possible durability.
Cut the trim to the desired length using a fine-toothed saw.
Remove the protective film from the adhesive strip and place the trim on the wall in the desired position.
Press the trim firmly into place.