Husk også...

Clips for Easy baseboard – T2000751

5106, 2.5 m – Easy baseboard, anthracite

The Easy baseboard from PRIMO is designed for those who want a modern and minimalist look in their home—without compromising on functionality. With its smart click system, the baseboard is mounted on hidden clips, creating a smooth and elegant finish where the wall meets the floor—with no visible nails or screws. This not only makes the result more stylish but also makes it easy to remove and reinstall the baseboard if, for example, you need to paint the wall, replace the floor, or perform other maintenance.

The Easy baseboard is made of plastic, making it resistant to moisture and rot, while also being easy to clean. Thanks to its flexible design and numerous installation options, the Easy series is an ideal choice for both renovations and new construction—whether you’re a do-it-yourselfer or a professional contractor. The baseboard effectively conceals the joint between the floor and the wall and can be used in virtually any room in the home.

Do not crack

Easy to mount

Flexibel

Shape as you like

No need to paint

Minimal maintenance

Dette produkt har ingen varianter

Additional information

Varenummer
DB
EAN
Højde
Bredde	15 mm
Længde	2.500 mm
Colli	6 Pcs
Produkttype
Toldnummer	39162000

The Easy baseboard is easy to install thanks to its clever clip system. The clips are screwed into the wall at regular intervals, and the baseboard is then clicked into place. The advantage of clip mounting is that the baseboard can be quickly removed and reattached as needed—for example, when painting or replacing flooring.
Alternatively, the baseboard can be installed with glue, nails, or screws, depending on your preferences and the nature of the substrate.

It’s that easy:

Attach a clip to the back of the baseboard and drill a hole through both the baseboard and the clip—this will serve as a template for the rest.
Use the hole in the molding as a drilling template and mark the desired locations on the wall.
Pre-drill the wall and insert wall anchors into the holes.
Screw the clips into the wall. Remember to place a clip no more than 5 cm from each end and then at 30–50 cm intervals, depending on the wall’s contour.
Cut any corners and joints at a 45° bevel using a fine-toothed miter saw.
Snap the molding onto the clips—and you’re done!