5076, 2.5 m – Classic baseboard, oak

PRIMO’s Classic baseboard is a stylish and practical choice for those who want an attractive and functional finish between the wall and floor. With its classic look, it fits into most types of homes—whether you’re renovating or building from scratch.
The baseboard features concealed installation and built-in cable routing, allowing you to easily and discreetly hide wires for items such as TVs, lamps, or network cables.

The smart click-in mechanism makes it easy to remove and reinstall the baseboard if you need to paint the walls, hang wallpaper, or replace the floor. This saves both time and hassle—and ensures the baseboard isn’t damaged in the process. The baseboard is available in white, off-white, and wood grain (oak), and can also be painted if you want to match it to the wall or floor.

The Classic baseboard combines an aesthetic design with high functionality and easy maintenance—to the delight of both DIY enthusiasts and professional craftsmen.

Do not crack

Easy to mount

Flexibel

Shape as you like

No need to paint

Minimal maintenance

Dette produkt har ingen varianter

Additional information

Varenummer	5076-0013-45
DB	1856497
EAN	5709847010382
Højde	60 mm
Bredde	14 mm
Længde	2.500 mm
Colli	8 pcs
Produkttype	Skirting
Toldnummer	39162000

The baseboard is easily installed using clips that are screwed into the wall. Then simply click the baseboard into place—and remove it again as needed. This solution provides a neat and professional finish without visible screws or nail holes.

Here’s how:

Secure the mounting clips with screws (at least 35 mm) and, if necessary, wall anchors, depending on the wall material. Do not over-tighten.
Place the clips all the way down to the floor. Route any wires behind the clips before screwing them in place. The distance from each end of the baseboard must not exceed 5 cm. A spacing of 30–50 cm between clips is recommended—though closer spacing is advisable for uneven walls.
Once all clips are installed, gently click the baseboard into place. If needed, use the accessory kit, which includes connectors for corners, straight sections, and ends. Remember to make miter cuts at corner joints for the best-looking result. You may want to glue the joints and end pieces for extra durability.