Bracket set – model 0727, gray

The weatherstrip, 0727—also known as a drag strip—is primarily used as a sealing solution for folding and sliding doors where traditional weatherstrips are not suitable. They are typically installed at the bottom of the door and fit snugly against the floor or a threshold to minimize drafts, dust, and noise. The strips are flexible and adapt to the surface when the door is opened and closed, making them ideal for areas with movable doors and varying surfaces.

Do not crack

Easy to mount

Flexibel

Shape as you like

No need to paint

Minimal maintenance

Dette produkt har ingen varianter

Additional information

Varenummer	0727-0001-45
DB	4639241
EAN	5709847072731
Højde
Bredde	10 mm
Længde	2.500 mm
Colli	40 Pcs
Produkttype	Clamp sealing
Toldnummer	39162000

A properly installed trim strip ensures a neat finish and a tight seal around doors and windows. The trim strip is easy to work with and is installed directly using a staple gun. It is important that the surface is clean and dry, and that the trim strip is positioned precisely so that it does not interfere with the function of the door or window.

Follow the steps below for a good, long-lasting result:

Clean the
surface Remove dirt and dust from the area where the trim will be installed so it fits properly.

Measure the
length Use a measuring tape to determine the exact length you need.

Cut to
size Cut the trim with trim shears. Cut the corners at a 45° bevel. Position the trim correctly—close to the surface, but without interfering with the door or window’s operation.

Secure the
trim Use a staple gun to secure the trim. Staple as needed, and make sure the trim is tight and straight. If the surface is uneven, it’s a good idea to use more staples.

Finish with a check
: Check that the trim fits snugly without blocking the opening/closing mechanism by closing the door or window.