Bracket set – model 0775, gray

PRIMO weatherstripping is recommended when renovating doors and windows manufactured before 1990, when this type of weatherstripping was commonly used. The weatherstripping ensures a tight seal between the frame and the sash and optimizes the insulation performance of your doors or windows.

If the weatherstripping in existing windows or doors cannot be replaced, a universal weatherstripping strip can be a useful alternative, as it can be used where other solutions fall short.

Do not crack

Easy to mount

Flexibel

Shape as you like

No need to paint

Minimal maintenance

Dette produkt har ingen varianter

Additional information

Varenummer	0775-0004-45
DB	2496267
EAN	5709847011013
Højde	4-7 mm
Bredde	9 mm
Længde	100 m
Colli	1 Pcs
Produkttype	Clamp sealing
Toldnummer	39162000

A properly installed trim strip ensures a neat finish and a tight seal around doors and windows. The strip is easy to work with and is installed directly using a staple gun. It is important that the surface is clean and dry, and that the strip is positioned precisely so that it does not interfere with the function of the door or window.

Follow the steps below for a good, long-lasting result:

Clean the
surface Remove dirt and dust from the area where the trim will be installed so that it fits properly.

Measure the
length Use a measuring tape to determine the exact length you need.

Cut to
size Cut the trim strip with trim shears. Cut the corners at a 45° bevel. Position the trim correctly—close to the surface, but without interfering with the operation of the door or window.

Secure the
trim Use a staple gun to secure the trim. Staple as needed, and make sure the trim is tight and straight. If the surface is uneven, it’s a good idea to use more staples.

Finish with a check
: Check that the trim fits snugly without blocking the opening/closing mechanism by closing the door or window.