Does the seal on your door need to be replaced? Are sounds and odors seeping through the doors more and more noticeably? If so, the seal on the interior door may be worn out, and replacing it could work wonders.
This PRIMO weatherstripping fits into grooves between 3 and 4 mm. Place the weatherstripping exactly where the old seal was installed, and you’ll notice a significant difference. Replacing it reduces the transmission of noise, drafts, odors, and dust that previously could move freely—even through a closed door.
AC-grade material with high UV resistance and easy installation.
Easy to mount
Shape as you like
Minimal maintenance
| Varenummer | 0680-2043-49 |
|---|---|
| DB | 2333590 |
| EAN | 4260027236806 |
| Højde | 12 mm |
| Bredde | 12 mm |
| Længde | 100 m |
| Colli | 1 Pcs |
| Produkttype | Gasket |
| Toldnummer | 39162000 |
The door stop seal is simply pressed into the groove in the door.
Please note that the seal is not fully compressed when the door is closed, as it will lose its resilience over time and reduce its sealing effectiveness.
Here’s how:
1. Thoroughly clean and degrease the surface.
2. Measure and adjust the length of the seal.
3. Press the seal firmly into the groove
. 5. Check that the entire strip is seated evenly and tightly.
