0934, 70 mm – PVC-free soft skirting board, 1.3 mm, grey

These PVC-free soft skirting boards are self-adhesive and designed for quick and easy installation without the use of
screws or nails. To ensure the best possible adhesion, it is important that the skirting board is left to acclimatise in
the room where it is to be fitted for at least 3 days, and that the room temperature is at least 18°C at
the time of fitting.

The surface must be clean, dry and even, and free from dust, grease and loose plaster. Please note that
self-adhesive strips do not achieve optimal adhesion on all surfaces, including woodchip wallpaper,
hessian, water-scrubbed walls and other uneven surfaces.

When fitting, it is recommended to remove the protective film as you go along and press the moulding firmly into place with even pressure
. Do not stretch the moulding during fitting. For the best-looking and most durable result
, mitre cutting at the corners is recommended.

See the installation video and the full installation guide for detailed instructions.

How to fit the soft mouldings:

1. Temperature and acclimatisation: Store the moulding for at least 3 days in the room where it is to be fitted. The room must be at least 18 °C and thoroughly heated.
2. Prepare the surface: Ensure that the wall and floor are clean, dry and even. Remove dust and loose plaster. Avoid fitting onto woodchip wallpaper or uneven walls.
3. Acclimatise the moulding: Unroll the moulding and allow it to rest for a short while. Do not stretch the moulding during installation.
4. Installation: Remove the backing film a little at a time and press the moulding firmly into place with even pressure in the direction of installation. Avoid removing the entire protective film in one go.
5. Corners: Cut the skirting board at the corners to prevent it from coming loose. If necessary, use extra contact adhesive in the corners.
6. Maintenance: The moulding can be cleaned with standard cleaning products and withstands daily washing.