0937, 80 mm – PVC-free soft skirting board, 1.3 mm, black

PRIMO’s PVC-free soft skirting board is designed for modern construction and renovation projects where both functionality and practicality are key requirements
. The flexible profile provides an elegant finish along the wall and
conceals minor imperfections.

The self-adhesive solution makes installation quick, and the smooth surface is easy to keep clean on
a day-to-day basis.

Do not crack

Easy to mount

Flexibel

Shape as you like

No need to paint

Minimal maintenance

Dette produkt har ingen varianter

Additional information

Varenummer	0937-0001-45
DB	2614879
EAN	5709847011952
Højde	80 mm
Bredde	16 mm
Længde	48 m
Colli	1 Pcs
Produkttype	Soft skirting board
Toldnummer	39162000

These PVC-free soft skirting boards are self-adhesive and designed for quick and easy installation without the need for
screws or nails. To ensure the best possible adhesion, it is important that the skirting board is left to acclimatise in
the room where it is to be fitted for at least 3 days, and that the room temperature is at least 18°C at
the time of fitting.

The surface must be clean, dry and even, and free from dust, grease and loose plaster. Please note that
self-adhesive mouldings do not achieve optimal adhesion on all surfaces, including woodchip wallpaper,
hessian, water-scrubbed walls and other uneven surfaces.

When fitting, it is recommended to remove the protective film as you go and press the moulding firmly into place with even pressure
. The moulding must not be stretched during fitting. For the best-looking and most durable result
, mitre cutting at corners is recommended.

See the installation video and the full installation guide for detailed instructions.

How to fit the soft mouldings:

Temperature and acclimatisation: Store the moulding for at least 3 days in the room where it is to be fitted. The room must be at least 18 °C and thoroughly heated.
Prepare the surface: Ensure that the wall and floor are clean, dry and level. Remove dust and loose plaster. Avoid fitting on woodchip wallpaper or uneven walls.
Acclimatise the moulding: Unroll the moulding and allow it to rest for a short while. Do not stretch the moulding during installation.
Installation: Remove the backing film a little at a time and press the moulding firmly into place with even pressure in the direction of installation. Avoid removing the entire protective film in one go.
Corners: Cut the moulding at the corners to prevent it from coming loose. If necessary, use extra contact adhesive in the corners.
Maintenance: The strip can be cleaned with standard cleaning products and withstands daily washing.