0938, 100 mm – PVC-free soft skirting board, 1.3 mm, grey

With this PVC-free soft skirting board, you get a hard-wearing and low-maintenance solution for
professional environments. The skirting board helps to create a clean and harmonious look, whilst protecting
the junction between the wall and the floor.

The material is flexible, easy to clean and designed for areas subject to daily use where a simple and durable solution is required
.

Do not crack

Easy to mount

Flexibel

Shape as you like

No need to paint

Minimal maintenance

Dette produkt har ingen varianter

Additional information

Varenummer	0938-0002-45
DB	2614882
EAN	5709847011983
Højde	100 mm
Bredde	16 mm
Længde	48 m
Colli	1 Pcs
Produkttype	Soft skirting board
Toldnummer	39162000

These PVC-free soft skirting boards are self-adhesive and designed for quick and easy fitting without the need for
screws or nails. To ensure the best possible adhesion, it is important that the skirting board is allowed to acclimatise in
the room where it is to be fitted for at least 3 days, and that the room temperature is at least 18°C at
the time of fitting.

The surface must be clean, dry and even, and free from dust, grease and loose plaster. Please note that
self-adhesive mouldings do not achieve optimal adhesion on all surfaces, including woodchip wallpaper,
hessian, water-scrubbed walls and other uneven surfaces.

When fitting, it is recommended to remove the protective film as you go and press the moulding firmly into place with even pressure
. The moulding must not be stretched during fitting. For the best-looking and most durable result
, mitre cutting at the corners is recommended.

See the installation video and the full installation guide for detailed instructions.

How to fit the soft mouldings:

Temperature and acclimatisation: Store the moulding for at least 3 days in the room where it is to be fitted. The room must be at least 18 °C and thoroughly heated.
Prepare the surface: Ensure that the wall and floor are clean, dry and level. Remove dust and loose plaster. Avoid fitting on woodchip wallpaper or uneven walls.
Acclimatise the moulding: Unroll the moulding and leave it to rest for a short while. Do not stretch the moulding during installation.
Installation: Remove the backing film a little at a time and press the moulding firmly into place with even pressure in the direction of installation. Avoid removing the entire protective film in one go.
Corners: Cut the moulding at the corners to prevent it from coming loose. If necessary, use extra contact adhesive in the corners.
Maintenance: The strip can be cleaned with standard cleaning products and can withstand daily washing.