Husk også...

T2001444 – Mounting Kit for Classic Baseboard, Off-White

T2001443 – Mounting kit for Classic baseboard, white

Classic baseboard – model 5076

PRIMO’s Classic baseboard is a stylish and practical choice for those who want an attractive and functional finish between the wall and the floor. With its classic look, it fits into most types of homes—whether you’re renovating or building from scratch.
The baseboard features concealed mounting and built-in cable routing, allowing you to easily and discreetly hide wires for items such as TVs, lamps, or network cables.

The smart click-in mechanism makes it easy to remove and reinstall the baseboard if you need to paint the walls, hang wallpaper, or replace the floor. This saves both time and effort—and ensures the baseboard isn’t damaged in the process. The baseboard is available in white, off-white, and wood grain (oak), and can also be painted if you want to match it to the wall or floor.

The Classic baseboard combines an aesthetic design with high functionality and easy maintenance—delighting both DIYers and professional tradespeople alike.

Do not crack

Easy to mount

Flexibel

Shape as you like

No need to paint

Minimal maintenance

5076, 2.5 m – Classic baseboard, oak

Variant: 5076-0013-45

DB: 1856497

EAN: 5709847010382

Colli: 8 pcs

5076, 3.1 m – Classic baseboard, off-white

Variant: 5076-0016-45

DB: 1984024

EAN: 5709847407663

Colli: 8 pcs

5076, 3.1 m – Classic Baseboard, white

Variant: 5076-0015-45

DB: 1984022

EAN: 5709847407656

Colli: 8 pcs

Additional information

Højde	60 mm
Bredde	14 mm
Længde	3.100 mm / 2.500 mm
Colli	8 pcs
Produkttype	Skirting
Toldnummer	39162000

The baseboard is easily installed using clips that are screwed to the wall. Then simply click the baseboard into place—and remove it again as needed. This solution provides a neat and professional finish without visible screws or nail holes.

Here’s how:

Secure the mounting clips with screws (min. 35 mm) and, if necessary, wall anchors, depending on the wall material. Do not over-tighten the screws.
Place the clips all the way down to the floor. Route any wires behind the clips before screwing them in place. The distance from each end of the baseboard must not exceed 5 cm. A spacing of 30–50 cm between clips is recommended—though closer spacing is advisable for uneven walls.
Once all clips are installed, gently snap the baseboard into place. If needed, use the accessory kit, which includes connectors for corners, straight sections, and end pieces. Remember to make miter cuts at corner joints for the best-looking result. For added durability, you may want to glue the joints and end pieces.