Husk også...

Clips for Easy baseboard – T2000751

Easy skirting with concealed mounting – model 5106

The easy skirting with concealed mounting from PRIMO is designed for those who want a modern and minimalist look in their home—without compromising on functionality. With its smart click system, the baseboard is mounted using hidden clips, creating a smooth and elegant finish where the wall meets the floor—without any visible nails or screws. This not only makes the result more stylish but also makes it easy to remove and reinstall the baseboard if, for example, you need to paint the wall, replace the floor, or perform other maintenance.

The easy skirting with concealed mounting is made of plastic, making it resistant to moisture and rot, while also being easy to clean. Thanks to its flexible design and numerous installation options, the Easy series is an ideal choice for both renovations and new construction—whether you’re a do-it-yourselfer or a professional contractor. The skirting effectively conceals the joint between the floor and wall and can be used in virtually any room in the home.

Do not crack

Easy to mount

Flexibel

Shape as you like

No need to paint

Minimal maintenance

5106, 2.5 m – Easy baseboard, anthracite

Variant: 5106-0006-45

Colli: 6 Pcs

5106, 2.5 m – easy skirting with concealed mounting, off-white

Variant: 5106-0004-45

DB: 1636151

EAN: 5709847510646

Colli: 6 Pcs

5106, 2.5 m – easy skirting with concealed mounting, white

Variant: 5106-0002-45

DB: 1612979

EAN: 5709847510622

Colli: 6 Pcs

5106, 3.1 m – easy skirting with clips, off-white

Variant: 5106-0003-45

DB: 1633737

EAN: 5709847510639

Colli: 6 Pcs

5106, 3.1 m – easy skirting with clips, white

Variant: 5106-0001-45

DB: 1612978

EAN: 5709847510615

Colli: 6 Pcs

Bredde	15 mm
Colli	6 Pcs
Toldnummer	39162000

The easy skirting with concealed mounting is easy to install thanks to its clever clip system. The clips are screwed into the wall at regular intervals, and the baseboard is then clicked into place. The advantage of the clip installation is that the baseboard can be quickly removed and reattached as needed—for example, when painting or replacing the floor.
Alternatively, the skirting can be installed with glue, nails, or screws, depending on your preferences and the nature of the surface.

It is that easy:

Attach a clip to the back of the baseboard and drill a hole through both the baseboard and the clip—this will serve as a template for the rest.
Use the hole in the skirting as a drilling template and mark the desired locations on the wall.
Pre-drill the wall and insert wall anchors into the holes.
Screw the clips into the wall. Remember to place one clip no more than 5 cm from each end and then at 30–50 cm intervals, depending on the wall’s contour.
Cut any corners and joints at a 45° bevel using a fine-toothed miter saw.
Snap the skirting onto the clips—and you’re done!